Solid Oxide Fuel Cell APU Feasibility Study for a Long Range Commercial Aircraft Using UTC ITAPS Approach. Volume 1; Aircraft Propulsion and Subsystem

By National Aeronautics and Space Administration

The objective of this contract effort was to define the functionality and evaluate the propulsion and power system benefits derived from a Solid Oxide Fuel Cell (SOFC) based Auxiliary Power Unit (APU) for a future long range commercial aircraft, and to define the technology gaps to enable such a system. The study employed technologies commensurate with Entry into Service (EIS) in 2015. United Technologies Corporation (UTC) Integrated Total Aircraft Power System (ITAPS) methodologies were used to evaluate system concepts to a conceptual level of fidelity. The technology benefits were captured as reductions of the mission fuel burn and emissions. The baseline aircraft considered was the Boeing 777-200ER airframe with more electric subsystems, Ultra Efficient Engine Technology (UEET) engines, and an advanced APU with ceramics for increased efficiency. In addition to the baseline architecture, four architectures using an SOFC system to replace the conventional APU were investigated. The mission fuel burn savings for Architecture-A, which has minimal system integration, is 0.16 percent. Architecture-B and Architecture-C employ greater system integration and obtain fuel burn benefits of 0.44 and 0.70 percent, respectively. Architecture-D represents the highest level of integration and obtains a benefit of 0.77 percent. Srinivasan, Hari and Yamanis, Jean and Welch, Rick and Tulyani, Sonia and Hardin, Larry Glenn Research Center NASA/CR-2006-214458/VOL1, E-15722 NAS3-01138; WBS 561581.02.08.03.06.01 AUXILIARY POWER SOURCES; SOLID OXIDE FUEL CELLS; BOEING 777 AIRCRAFT; CERAMICS; AIRFRAMES; SYSTEMS INTEGRATION; PROPULSION; FEASIBILITY

• Format: Paperback
• Language: English
• ISBN: B08F6JZ9XT
• ISBN13: 9798672039473
• Release Date: January 1
• Publisher: Independently Published
• Length: 40 Pages
• Weight: 0.26 lbs.
• Dimensions: 0.1" x 8.5" x 11.0"